Exactly as advertised. Worked as I needed them to. Now to buy some in different sizes.

George N Verified Purchase

Wa-8 Stainless Steel Washer A3135-Ss-017 #8

Five stars for sure.

Mark S Verified Purchase

Wa-8 Stainless Steel Washer A3135-Ss-017 #8

pricey

Dan C Verified Purchase

Wa-8 Stainless Steel Washer A3135-Ss-017 #8

Good product

Aviation S Verified Purchase

Wa-8 Stainless Steel Washer A3135-Ss-017 #8

Good quality. Does the job.

Eric T Verified Purchase

Wa-8 Stainless Steel Washer A3135-Ss-017 #8

good

Houston L Verified Purchase

Wa-8 Stainless Steel Washer A3135-Ss-017 #8

Excellent

Yv P Verified Purchase

Wa-8 Stainless Steel Washer A3135-Ss-017 #8

The washer to use with 8/32 csk stainless screw on numerous locations on Piper, Cessna , Mooney, Vans, etc. Replaces the plated steel washer that rusts.

David Verified Purchase

Wa-8 Stainless Steel Washer A3135-Ss-017 #8

Good quality

James G Verified Purchase

Wa-8 Stainless Steel Washer A3135-Ss-017 #8

After searching for these special washer for 2 years, finaly found them at aircraft spruce and specialty!! Thanks!

Richard T Verified Purchase

Wa-8 Stainless Steel Washer A3135-Ss-017 #8

Replacements for some washers during annual, work great!

Randy P Verified Purchase

Wa-8 Stainless Steel Washer A3135-Ss-017 #8

Always needed

Bob G Verified Purchase

Wa-8 Stainless Steel Washer A3135-Ss-017 #8

Received all products in excellent condition and exactly as ordered. Fast Shipping.

As advertised

Product is exactly as advertised. Arrived in a timely manner

Used in conjunction with machine screws to attach panels to my race car. You can do this to finish with a flush attachment. Size allow for more surface are to hold panel secure. Machine head screw fits great in the recess of the washer. My racing buddies are taking notice.

My Order was Full of Excellent Parts! Excellent Price! Very Fare and Quick Shipping! Quick and Easy Ordering! YES! buy from Aircraft Spruce! Thanks Again, Carl

The product is as advertised, very helpful to have the cross-reference feature.

Item ordered was as expected.

Exactly what I was looking for. Thank you

Essential airplane item. Buy them by the dozen and apply liberally where screws go into fiberglass or where holes are worn out. Look and quality are great.

Hard to find CSK Stainless washers at a reasonable price and a quick delivery. Would recommend.

I wanted to keep the hardware that will attach my propeller spinner, as flush to the surface of the spinner as possible. These do the job nicely when you use a countersink and flat heat screws.

I used these washers to better secure a large fiberglass spinner. I had to use the... SS MACHINE SCREW AN507C1032R10 which have slightly larger diameter than the ID of the washer. Drilling out the washer to accommodate the screw made a perfect fit.

...always worked great: never had a problem with these.

Received quickly, shipped at a reasonable price with USPS first class, item is as described.

needed tool box item

Excellent quality with a nice finish

Excellent time tested company. Great price, Great product, fast shipping.

Its a dimpled washer what can I say, it fits and spreads the load, works great with fiberglass fairings where you dont want to much load in one direction that might crack the fiberglass. The product is exactly what is says it is and set up for 100 degree flush bolts.

Fiberglass fittings & fairings are often attached to a plane with counter sunk flat head screws. But fiberglass is soft compared to metal, which will erode and enlarge the countersunk holes during the stress applied while flying. Brand name Tinnerman countersunk washers spread the force and lessen the wear, but are made from Zinc coated spring steel. CSK washers are knockoffs, made from stainless steel and are cheaper. I’m building an RV-14A and can report that the CSK washers fit the fiberglass countersunk holes and 100° flat head screws perfectly (countersink only enough to fit the screw) and are low profile – so shouldn’t cause too much drag. I haven’t attempted to countersink the whole washer, which would weaken the fiberglass. So basically when using these washers you trade less wear & tear maintenance for some loss in speed – how much I’ll report in a year’s time. But having just spent more than 3+ full time weeks attaching the wheel pants and transitional fairings to my RV-14 (who knew there was so much fiberglass work on an aluminum airplane), I can tell you I never want to do fiberglass work again – my skin still itches and I’m still coughing – despite wearing protective gowns & particulate masks. Synergy Air builds Vans Aircraft professionally & recommended that I use these washers.

These are not the decorative CSK washers that Im use to seeing on expensive airplanes. These seem too thin and are a different grade of stainless steel. Youll likely need to change all IOT match.

David A Verified Purchase

Wa-8 Stainless Steel Washer A3135-Ss-017 #8

Had to drill washer out to 3/16 to make it fit on my Cessna 210 cowling.

Robert W Verified Purchase

Wa-8 Stainless Steel Washer A3135-Ss-017 #8

Does not fit #8 screw, I had to drill out to 3/16.

Bob W Verified Purchase

Wa-8 Stainless Steel Washer A3135-Ss-017 #8