Versatile bracket of .016 stainless steel accommodates gascolators with either metal or glass bowl. When mounted as illustrated, inlet and outlet connections are on sides. When bracket is inverted, one port of gascolator faces firewall for direct routing of fuel line through firewall. A fine quality item manufactured by ACS Products Co. Fits gascolators sold after May 1, 1989.
Made in USA |
Very easy install 😁
Gascolator Bracket 10371
Gascolator Bracket 10371
you have to modify the top tabs or you cant put the geolocator in it.
Gascolator Bracket 10371
Gascolator Bracket 10371
Exactly as I wanted.
Gascolator Bracket 10371
Gascolator Bracket 10371
I used this with the Homebuilders Gascolator 10580. All the edges needed to be de-burred. I also painted it. **It was an easy install with pull rivets, as long as the tool was used from the back side. **You cannot easily fit a rivet puller onto the narrow flanges without the rivet being set in place crooked.
Gascolator Bracket 10371
I have used these on many projects with great results. The price is very well within reason considering the effort and materials to build one.
Not a good fit for a Steve’s Aircraft gascolator, too narrow. Had to do some bending to make it fit
Gascolator Bracket 10371
I bought this bracket to mount the gascolator 10580. Unfortunately the gascolator doesnt fit into the bracket (its close) making the bracket unusable.
Gascolator Bracket 10371
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The gascolator hole in the mount is approx 1-7/8".
0.166"
No, you would need 05-00907 for the high pressure unit.
This bracket is for the 10580 gascolator. The 10374 firewall fitting is used with the high pressure gascolator. They are not interchangeable.
10371 is made for 10580, the gascolator has to be taken apart before it comes out of the bracket.