Initial fitting of control surfaces require multiple installation and removals of the parts to fit, trim, and adjust everything. These temporary assembly pins make the task quicker and easier. Pins are 3/16” diameter with tapered points and angle bends for easy installation. The pins are threaded so the pin holder can be removed — this is necessary to prevent damage should you move the control surface too far during fitting. To remove pins just screw holder back on pin and remove pin. Packaged in sets: 6 pins / 2 holders. |
Fantastic tool for ANY RV (Vans aircraft) for control surface installation on hinge bearings. Holds control surface in alignment for easy insertion of bolt as pin is pushed out. Must have !
Avery Temperature Assembly Pins
Worth their weight in gold - makes single handed work so much easier. I hadnt seen these or heard of these before - so glad I took the chance and bought them.
Not a must have, but OMG how they make life soooo incredibly much easier. 100% content I have them now. Like a hammer, you’ll never part with these ever either!
Avery Temperature Assembly Pins
Heard about these from other builders. Currently working on fit of tail feathers. These make are amazing! SO much easier to get on and off. A few seconds, versus minutes trying to maneuver a bolt in and out multiple times.
Avery Temperature Assembly Pins
I was using an allen wrench until I came across these. I saw another builder that was using them but he didnt say what they were called, so this tool was difficult to find. Finally found and used for the first time. You can unscrew the handle while the pin is still in place which allows full travel of the control surface while adjusting.
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.