Aircraft Spruce Canada
Brantford, ON Canada
Corona, CA | Peachtree City, GA
Chicago, IL | Wasilla, AK
Aircraft Spruce Canada- Wishlists
- 1-877-795-2278
- Contact Us
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
Sheetholders Cwnl-3/16 Cleco
MFR Model# CWNL-3/16
Overview
| Wing Nut Fasteners are recommended for low production applications where high clamping force is required.The clamping force ranges from zero to 300 lbs. |
Similar Items
Reviews
Worked as designed . Not used on an aircraft, but on a similar aluminum project. Great tool for riveting.
Verified Purchase
Sheetholders Cwnl-3/16 Cleco
Used these to hold a backing plate on the inside of a carbon fiber tube. Worked like a dream so I could get the blind rivets installed tightly. Love that this thumbscrew version does not require a tool for use. (I have too many tools)
Verified Purchase
Sheetholders Cwnl-3/16 Cleco
Well built and a must have in any tool box.
solid well made
Works great on keeping flanges pulled down for final drilling and riveting.
Long Reach Sheet Holder was the only tool I found that could hold 3/4 stack of aluminum doublers together for my Main Spar. Works great!
I purchased these in 3/32 size to tightly clamp the lower tail cone skins of an RV-14 build project. The arched ends of the clamping wires have a lower profile than standard cleco clamps. The lower profile caused the clamping wires to pull straight through dimpled #40 holes well before any meaningful clamping force could be applied, proving the clamps to be worthless for this application. I tried obtaining a return RMA online and found they are not returnable. I called customer service and asked where on the website I could find that they are not returnable before ordering the product and was told I probably could not. After I fussed a little about it, the rep did issue a return RMA. The rep was polite and considerate. I will be further investigating the companys return policy before ordering another product.
Q&A
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
It is the drill number for the holes. You would need a #10 drill for the #10 cleco.
Just under 4 inches overall.
