1-877-795-2278 | info@aircraftspruce.ca
Aircraft Spruce Canada
Brantford, ON Canada
Corona, CA | Peachtree City, GA
Chicago, IL | Wasilla, AK
 
 
FREE SHIPPING ON ORDERS OVER $699 (SOME EXCLUSIONS APPLY) | 877-795-2278
Home / Pilot Supplies / CO Detectors /Guardian Smartlink 851 Flight Data Recorder CO Detector
Main Image
Main Image
Main Image
Thumbs 1
Thumbs 1
Thumbs 1

Guardian Smartlink 851 Flight Data Recorder CO Detector

0 Reviews 1 Answered Question
$2553.00/Each
Quantity
Add to Wishlist
Part# 13-20703
MFR Model# 75-79

Overview

The smartLink 851 is a Flight Data Recorder, CO Detector, USB Power Supply (dual 2.7 amp) and AHRS that works with the Guardian Avionics smartPlane system. This unit is remote mounted behind the panel or on a smartPlane iPad mount to save space in smaller panels. The smartLink 851 communicates with the smartMFD iOS app via a USB connection or Bluetooth connection.

NORSEE Approved Remote Mounted Flight Data Recorder, CO Detector, USB Power Supply, and AHRS with Bluetooth and USB Connection

Start with the CO Poisoning Prevention that Guardian Avionics is Known For.
The smartLink 851 is built around the reliable and accurate Carbon Monoxide detection technology that Guardian Avionics and CO Guardian has been known for. The sensitive onboard CO sensor alarms an initial warning when CO levels measure greater than 50 parts-per-million (PPM) up to 99 PPM. A persistent warning will trigger when levels climb above 99 PPM immediately when detected.

Your GPS, Engine Monitor, and Attitude Connect & Display on Your iPad & iPhone.
The smartLink 851 can be connected to your onboard GPS and Engine Monitor via RS-232, allowing accurate navigation and engine performance data to be aggregated, transmitted, displayed, and recorded on your iPad and/or iPhone through the Guardian Avionics smartMFD app via a Bluetooth connection. The smartLink 851 also has a built-in AHRS (Attitude and Heading Reference System) for VFR use that will prove attitude data to the iOS. As a result, your iPad and iPhone become mini-multifunction displays -- fully equipped with accurate VFR and IFR maps and charts, rich graphical engine performance information, and even a mini-PFD/MFD for quick reference. All Carbon Monoxide alerts and levels are also available on the smartMFD app too!

All Your Flight Data is Sent and Stored in the smartData Web App for You.
Through the smartMFD app, all of your flight data is stored and uploaded to your account on the Guardian Avionics smartData web app via 3G/4G/LTE or WiFi at the end of every flight, with the ability to download and view flight tracks on programs like Google Earth, view engine data through rich charts and graphs, and even export your data for use through other programs or to send to others. If your iPad or iPhone is connected to your audio panel through a 3.5 mm audio jack, the app will even record the audio from your intercom and upload it to your account for each flight too!

How can you use the data? See how accurate your recent practice approaches were on a recent flight. Send trend data to your A&P or engine manufacturer to troubleshoot an issue. Evaluate all aspects of a recent training flight, including radio procedures.

Budget and Panel Space Friendly.
Equipping the smartLink 851 is like bundling multiple pieces of equipment into one compact remote mounted or smartPanel mounted unit. In the past you’d need to buy and install a CO detector, GPS signal booster, USB Power Supply and backup AHRS for your iPad/iPhone as separate items – and flight data recording on an app for both navigation and engine data was not even available! Now you can get all of that in one small, easy to install package for one reasonable price!

Compatibility

EEFIS (GPS,AHRS, Engine)
  • Garmin G3X
  • Garmin G3X Touch
  • Guardian Avionics smartMFD

GPS / NAV / COM
  • Avidyne IFD 440
  • Avidyne IFD 540
  • Garmin GNS 430
  • Garmin GNS 480
  • Garmin GNS 530
  • Garmin GTN 430
  • Garmin GNS 625
  • Garmin GNS 635
  • Garmin GNS 650
  • Garmin GNS 725
  • Garmin GNS 750
  • Garmin G5

Engine Monitors
  • J.P. Instruments (JPI) EDM 350 Experimental
  • J.P. Instruments (JPI) EDM 730
  • J.P. Instruments (JPI) EDM 830
  • J.P. Instruments (JPI) EDM 900 Primary
  • J.P. Instruments (JPI) EDM 900 Experimental
  • J.P. Instruments (JPI) EDM 930 Primary
  • J.P. Instruments (JPI) EDM 930 Experimental
  • Guardian Avionics EM100

Specifications

  • 2 USB Smart Chargers 5.1 VDC @ 2 Amps
  • 3 Bluetooth connections
  • 2 RS232 serial outputs
  • 5 RS232 serial inputs
  • 5 Amp circuit breaker
  • Built-in CO detector
  • 26-pin high-density connector (for image see Images section above)
  • Temperature range: -20 degrees Celsius to 70 degrees Celsius
  • Humidity range: 5% to 95% RH (non-condensating)
  • Input power 14/28 VDC
  • Built-in pressure sensor provides cabin pressure altitude warnings at 10K, 12.5K, and 14K feet
  • Built-in temperature sensor
  • Audible tone to headset
  • Dimensions (approximate - inches): 5.75”L x 1.3”H x 4.25”W
  • Weight: 8 oz.
  • 1 year Limited Warranty
  • 60-day money-back guarantee

Documents

Reviews

Submit a Review

Q&A

Submit

Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Is this crash hardened at all?

Per the manufacturer: No. This is not crash hardened.

View in Catalog

View Image View in Catalog