Can be used on fuel injection systems up to 50 psi .Anodized inside and out to prevent corrosion. Has two 1/4" NPT ports for 3/8" fuel line, a 1/8" primer port, and a 1/8" NPT drain valve port. Comes with firewall mount. 118 microns |
Very nice quality part.
Usher Gascolator Gas-6
Very well made gascolater with good built in mounting holes.
Usher Gascolator Gas-6
Nice quality gascolator.
Usher Gascolator Gas-6
Was backordered, so I had to wait. But when it arrived, I was happy I ordered it. I was replacing an older glass gascolator on my Cassutt which had seen better days. Mounting and installation were straight forward. Worked and is working as expected. It is well made and looks like it will provide years of service.
After installation, I get a 4 PSI pressure drop on takeoff. Do not know why yet, I have to use the boost pump. Cruise power is ok.
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Per the manufacture: We made some minor modifications to the GAS5 and it is now called the GAS6. The difference is to the top of the Gascolator. On the interior of the top we modified some features for better flow and also to more efficiently capture loose impediments. On the outside of the top we reduced the width by 1/8" on one side to reduce weight.
0.59 lbs approximately.