Description | Part No. | Price | Buy |
---|---|---|---|
2-1/4 UMA Vertical Speed Indicator Range: ±2,000 ft/min. | 10-05500 | $552.00 | |
2-1/4 UMA Vertical Speed Indicator Range: ±3,000 ft/min. | 10-00079 | $552.00 | |
2-1/4 UMA Vertical Speed Indicator Range: ±4,000 ft/min. | 10-05550 | $604.00 | |
2-1/4 UMA Vertical Speed Indicator Range: ±6,000 ft/min. | 10-05600 | $604.00 | |
2-1/4 UMA Vertical Speed Indicator Climb 0-4000ft | 10-05560 | $634.00 | |
2-1/4 UMA Vertical Speed Indicator Rate of Change 4k | 10-05570 | $592.00 | |
2-1/4 UMA Vertical Speed Indicator Cabin Climb 4000ft | 10-05580 | $634.00 | |
2-1/4 UMA Vertical Speed Indicator Climb 0-6000ft | 10-05610 | $634.00 | |
2-1/4 UMA Vertical Speed Indicator Rate of Change 6k | 10-06910 | $634.00 |
The vertical speed indicator is a precision instrument which provides an accurate indication of rate of change of altitude. This instrument is temperature compensated and is provided with a zero adjustment screw on the face of the case in the seven oclock position. Power: Static system. 2-1/4" Vertical Speed Indicator (Refer to Image #2) Case: Valox 420 Plastic Weight: 7.4 oz. |
Like the other UMA instruments, this is a good value. Solid, accurate, light, easy to read. Definitely recommended.
Installation was straight forward. First flight in the Carbon Cub after installation showed 1700 feet per minute on take off. Readings matched those shown on the G3X, but seeing them on a steam gauge is a lot more fun.
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
No, this page is for non certified UMA VSI. If you look under UMA you will find both a certified and non certified UMA VSI page.
This unit is 2.80 inches deep, and this is an electric gauge therefore will require a harness.