LED Wingtip Lighting for Experimental and Light Sport Aircraft LEDs are lightweight, low current and incredibly bright, vibration and moisture resistant... the ideal lighting technology for experimental and LSA aircraft. Note: Product does not meet the requirements of 91.205 (c), required for night flight. |
Whelen Microburst Plus Kit II MB2K
Very bright! Good but simple design. Be careful, dont look directly into the light!
Whelen Microburst Plus Kit II MB2K
The light pictured is the MB+3 not the MB+2. The 2 does not have rear facing white nav lights like the one pictured does.
Whelen Microburst Plus Kit II MB2K
Very bright and easy to install. A+
Whelen Microburst Plus Kit II MB2K
Very bright and easy to install.
Whelen Microburst Plus Kit II MB2K
Very easy to install, well built, and a nice product for the price!
Good equipment. Upgraded the wingtip strobes on my experimental - was using the Anti-Collision Strobe 45W 1350LM, part number 11-12424. Moved those to the tail. These are maybe three or four times brighter to the eye, in the hangar, but I dont have hard numbers to back that up. Solid units. You will need #4 flat-head screws to mount these. The mounting screw heads are directly under the cover gasket so you need to get a flush fit on the screw heads. Otherwise, straightforward to install. Nice to be able to sync the wingtips. The position red/green lights are good and bright. Definitely recommended.
Not so expensive, efficient, easy to install, perfect
I thought I was paying all this money for a bright light unit. NO. Its as dim as it can get! I bet its made in china and fabricator is making tons of profit!
Whelen Microburst Plus Kit II MB2K
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Per the manufacturer, there is not much difference between the Microburst II and III. We have added a spec sheet to the "Documents" tab on this web page for reference.
Per the manufacturer, these do not come with connectors or wiring. They have flying leads and would require connectors and cable.
This kit is sold as a pair. Includes one for each side.
Per the supplier: If an experimental aircraft is going to fly at night they need to meet the same requirements as a certified aircraft. With this being said the Micro Burst would not be approved. They need to look at the Whelen ORION series for approved lighting.
The pulse feature draws 1.2 amps. The correct wiring size will depend on the length of the wire. Please consult the wiring diagram in the AC43.13-1B.
No, the Microburst II does not have an integral rear facing white nav light. For that feature, you would need the Microburst III series. That is available as our part number 11-08473.
Yes, this will work with 12 Volts DC.
These are not FAA Approved for use in certified aircraft. They are intended for experimental and homebuilt applications only. We cannot recommend them for use in a Piper production aircraft.
No, the Microburst units are smaller.
Yes, this is priced and sold as a pair. You will get two lights.