MFG No. | PN | Screw Size | I.D. (in.) | O.D. (in.) | Approx. Thickness | Price per 100 |
---|---|---|---|---|---|---|
A3235-028-193 | 04-02036 | 10 | .196 | .75 | 0.035" | $30.00 |
Washers for use with 100° flat-head screws such as MS24693 and MS24694 machine screws and NAS548 sheet metal screws to provide reinforced, low-profile attachments. Made of spring steel, Zinc plated. |
Washer A3235-028-193 Tinnerman
I use the 1.25 inch diameter cone shaped washers to fasten rigid cement board to substrate plywood and substrate rigid insulation board, so fasteners be flush-mounted to the finished surface. The 0.75 inch diameter washers are too small for this purpose. May i suggest to restore the availability of the 1.25 inch diameter units.
Washer A3235-028-193 Tinnerman
Works well in securing trim panels on sliding door on our RV.
Washer A3235-028-193 Tinnerman (Pack Of 50)
Washer A3235-028-193 Tinnerman
Perfect for a short wing Piper cowl!
Washer A3235-028-193 Tinnerman
I like how using these with 100 degree screws leave a smooth finish....
Washer A3235-028-193 Tinnerman (Pack Of 50)
Washer A3235-028-193 Tinnerman
Washer A3235-028-193 Tinnerman
The parts are precisely formed, very consistent, completely burr-free, and uniform in finish quality.
Washer A3235-028-193 Tinnerman
Washer A3235-028-193 Tinnerman
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Approximate material thicknesses: #6 = 0.016", #8 = 0.024", #10 = 0.035", 1/4 = 0.035".
These washers are silver.
For this particular part number you would want a .140-.147" hole, a #28 or #27 drill would work.