Aircraft Spruce Canada
Brantford, ON Canada
Corona, CA | Peachtree City, GA
Chicago, IL | Wasilla, AK
Aircraft Spruce Canada- Wishlists
- 1-877-795-2278
- Contact Us
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
Baffle Fastener Female 8-32 Thread
MFR Model# JM41SPF
| Description | PN |
|---|---|
| FEMALE 8-32 THREAD | 05-01236 |
Overview
|
This engine baffle fastener kit makes attaching baffle material much easier. 8-32 Threads |
Kit Contents
- Qty 12: 05-01235 (BAFFLE FASTENER MALE 8-32 THREAD)
- Qty 12: 05-01236 (BAFFLE FASTENER FEMALE 8-32 THREAD)
Reviews
Used this on Cessna 172 for the dash nuts, worked great.
Should be Phillips head. Easier to grab on backside
The sleeve portion of the female side is too long, almost 3/16, so it wont clamp at all onto the baffle seal material through an aluminum baffle piece. Also because they are aluminum, once you tighten it once, it disturbs the threads at the end, and it is difficult to get the threads to start on a second assembly without chasing the thread with a tap. I sanded the sleeve portion down to 1/8 long and then they worked very well.
I was not impressed with this fastener system. I had to use washers in order to get the fastener to crimp down on the silicon baffle material. I ended up using machine screws and nyloc nuts for a much cleaner and functional result.
I was told that the head of the female fastener had a solid head. This is not correct. The head is drilled all the way thru. For my application I required a solid head.
Neat concept / poorly executed / material too soft / very poor thread quality. Chucked them, went back to pop rivets for engine baffling.
Q&A
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, they are both 1/8" NPT. We have added the kit component breakdown to the "Kit Contents" tab of this web page.
The outside dimension of the internal threaded tube is .202".
The total length of 05-01235 is 5/16".
That is correct.
