Flight data OAT probe for GT-50. Note: This is the OAT probe for the newer GT-50 G-Meter Gauge only. |
If you’re installing a GT50 this is a no brainer, This makes it much easier to see what the OAT is over my unlit poorly placed factory OAT gauge.
Flight Data OAT Probe For GT50
Easy to install and works great.
Flight Data OAT Probe For GT50
Super small and easy to install. We used single conductor shielded 22ga with the shield as the ground back to the GT-50. This unit and the multi-function clock are a super value.
Flight Data OAT Probe For GT50
Flight Data OAT Probe For GT50
Works as designed
Flight Data OAT Probe For GT50
Works great. It agrees with what my CHT, and EGT temps are showing, sitting in the shop. My plane is an experimental,, with removable wings. They suggest mounting this in the wing, outside the propeller arc. This probe, is so small, I mounted mine, behind the spinner.
Updated probe is easy to install with threaded attachment including nut, washer and but splice connectors installed on the probe leads
To be able to see how cold you are is very important. As in look honey we really are cold it is 32 degrees outside and look our true airspeed is...
not yet fitted
Flight Data OAT Probe For GT50
Flight Data OAT Probe For GT50
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
No, per the manual you will need the C307PS from Davtron. Part number 11-04603.