G101 The basic G101 grip features a momentary contact, 50 milliamp, SPST switch on top that can be used as a PTT button. The G101 grip is made of semi-soft UV and oil resistant foam. The upper switch housing is made of nylon with a lightly textured finish and is 4.75” (121 mm) tall. A SPST switch located on the top of the G101 grip can also be used as a PTT button. Ray Allen Company modern design stick grips can be wired directly to Ray Allen trim servos. This eliminates the need to wire relays in your trim system. However, if two grips are used, you will need either relays or a switch to transfer the control of trims from one grip to the other. The G1 and G2 series hand grip is made of semi-soft UV and oil resistant foam and the upper switch housing is lightly textured nylon. The G3 series grip is a lightly textured, BASF UV reisistant composite. All Ray Allen Stick Grips come as a complete kit including pre-cut and stripped 26 gage Teflon™ wires. RAC grips are designed to fit a 1” stick diameter with spacers included for easy installation on 3/4”, 7/8” stick tubes. All RAC grips have insets for labels and come with a customized, die-cut label sheet. The G3 grips also include three different colored faceplates (black, light gray and light tan) to compliment your aircraft’s interior colors. |
Two other Ray Allen RAC Stick Grip models available | G205 | G207 |
![]() | ![]() | |
Click Here | Click Here |
Great product!
RAC STICK GRIP MODEL G1
Nice product. Straight forward install.
RAC STICK GRIP MODEL G1
Great grip, works fine.
RAC STICK GRIP MODEL G1
Nice basic foam grip, 1” opening with plastic insert sleeves for smaller diameter sticks.
RAC STICK GRIP MODEL G1
RAC STICK GRIP MODEL G1
Not alot there for 89.00 but pretty easy to install and work properly.
RAC STICK GRIP MODEL G1
looks good
RAC STICK GRIP MODEL G1
RAC STICK GRIP MODEL G1
great
RAC STICK GRIP MODEL G1
Works great!
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Per the manufacturer, the top of the grip can fit a 1 inch stick but nothing larger. A 1 1/8 grip will not fit.
The G1 stick grip protrudes 1/2" above the original stick height.
It does not have aircraft specific applications but it will work with 3/4, 7/8 and 1" sticks.
The vendor does not make this recommendation in the instructions or on their website. This can be done but it would be at your discretion and risk.
You would have to drill your own hole in the grip itself, there is not one predrilled. The plastic top would slide approx 1/2 into the control stick.
34 inches.