Note: Light assembly and mount sold separately. See image above. See 'Accessories' to order flush mount. These versatile cockpit lights can be used to illuminate the instrument panel. They can be repositioned to illuminate your charts with their 110 degrees of angle adjustment while being able to rotate a full 360 degrees. Dimensions: 3/4" diameter, 1-5/8" tall fully-extended, 7/8" tall at 90 degrees. The mounting stud is 1/4" in diameter and can be mounted onto a surface up to .200" thick. Switchable models facilitate wiring an SPDT switch (not included) to the light, allowing either red or white operation. We also offer a flush-mount flange to mount the light if the back side of the light is unreachable. Flush Mount - (Pictured above) This part is for mounting and LED light Model 754 from the front side. The adapter base is 1-1/2" in diameter, stands 1-2" tall, and has a 1" bolt hole circle. |
Item as described, high quality and looks awesome.
LED Cockpit Lgt 754R-14V Red With Silver Housing
Look and works great. Glad I read other reviews and saw how bright they are and selected units with two red and 2 white. I used a selector switch. White as non dimmable cabin light and red for instrument lightings. They dim really well and are plenty bright at lowest setting.
Very nice! Bright and compact.
Super service as usual from AS. Great little light for supplemental panel lighting in old ACs. Very little current draw, easy to mount.
Small size allows for easy placement and great panel illumination.
Phenomenal lights! Got one white and one red to compare against original Grimes with 3.3A bulbs. At same time compared SuperBright 5-LED tower replacement bulbs (98mA white, 72mA red). The SuperBrights are only slightly brighter than original, but these 754s are probably 4 times as bright at half the current.
These are very well made fixtures. Perfect range of motion for my application. Clear instructions provided for wiring.
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, the 14 volt lights will operate fine in a 12 volt system. 12 volt and 14 volt are essentially interchangeable. Regarding Part Numbers 11-04393, 11-07481, 11-04395, 11-07483, 11-07485, 11-07487.
Yes, this is not a problem.
The output of this unit is 5,000.
Per the supplier: The measurement for these is candle power, not wattage. The candle power for 14v is 5000 MCD's. The power consumption is 30 milli amps.
Per the supplier: 4,000 milli candle power. We do not have the output info in lumens.
Per the supplier: "Yes, they will work with dimmers. This model is installed in new certified aircraft from the factory. With that said I have no PMAs or STCs to install them in other aircraft. I have been told if they are not primary cockpit lighting you dont need one but that depends on what fed you talk to."
Yes, these lights can be dimmed with a dimmer.
The 754 Series LED Cockpit Lights are not TSO'd or PMA'd.
Per the supplier: Quest Air Kodiak.
Part number AN3021-1 is a SPDT switch which is rated at 14 or 28 volts.