Aircraft Spruce Canada
Brantford, ON Canada
Corona, CA | Peachtree City, GA
Chicago, IL | Wasilla, AK
Aircraft Spruce Canada- Wishlists
- 1-877-795-2278
- Contact Us
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
Hobbyair 1 With 40 Hose And Half Mask
MFR Model# HB01
- JUMP TO
- Overview
- Features
- Reviews
- Q&A
- View in Catalog
| Description | Part No. |
|---|---|
| Hobbyair I with (Half Mask) 110V | 12-15850 |
Overview
| The Hobbyair Pro 1 is a fresh air breathing system specifically designed for the amateur painter which allows only fresh air to reach the user's lungs. It features a comfortable, lightweight facemask with beltline hook, simple snap together fittings, and is very affordable. Includes the pump unit with two stage, single speed, air bypass type motor, mask, belt and 40 foot delivery hose, fittings, filter, cord and case. The Buddy System Hobbyair is designed for two people and includes two 40 ft. delivery hoses. 1 yr warranty. Excellent for use in homebuilt aircraft construction and painting. |
Features
- Standard Output Blower Unit
- 40’ of Hose
- Half Facemask
- Belt
- Supplies 8 cfm of cool fresh air to your mask or hood.
Reviews
The Hobbyair 1 is a high quality unit made in the US. The half mask is comfortable and the attached rubber hose is a good length, attaching to the clip connect on the belt. The turbine air supply has plenty of volume through the 40 hose. The problem with the product is the 40 clear plastic reinforced supply hose. The plastic material is hard as a rock and doesnt flex or bend sufficiently as you move about. It also tends to coil up on itself and not lay flat. The hose is excessively rated at 200psi, and does not need to be reinforced either. Very frustrating went moving about. Im looking at purchasing the Citation supply hose but I need to confirm it is more flexible. Disappointing hose, otherwise a good product.
Verified Purchase
Hobbyair 1 With 40 Hose And Half Mask
I am very pleased with this machine. It was easy to setup and easy to operate. The mask fits well even with my eye glasses. It works like a charm and my breathing issues associated with painting scale models have disappeared for the most part. Just tickled pink with this purchase.
Verified Purchase
Hobbyair 1 With 40 Hose And Half Mask
Verified Purchase
Hobbyair 1 With 40 Hose And Half Mask
Excellent looking product Not used yet but turned it on to check moves a lot of air Nice that it’s Made in the USA
Verified Purchase
Hobbyair 1 With 40 Hose And Half Mask
I purchased this with the half mask so I can use it under my welding helmet in addition to using it for painting. The unit works well and is I think a good value. Seems to provide plenty air flow. It was shipped promptly.
Verified Purchase
Hobbyair 1 With 40 Hose And Half Mask
Aircraft Spruce delivered the Hobbyair quickly and packaged well. It is exactly as described.
Verified Purchase
Hobbyair 1 With 40 Hose And Half Mask
The hose smells like plastic. Ran cold water through it just like the instructions say. Still smells like plastic. The air is also hot. When you disconnect the hose from the machine the fittings are so hot they were almost burn you.
Verified Purchase
Hobbyair 1 With 40 Hose And Half Mask
I use the half mask for fiberglass work and I also got the option painting hood for spraying. I would recommend both, they work great. Dwight. P. Ontario
Verified Purchase
Hobbyair 1 With 40 Hose And Half Mask
The Hobbyair 1 appears well made, and contrary to the product description on Aircraft Spruce, this IS the variable speed model. The mask is comfortable, and the fresh air flow is great. I look forward to NOT breathing any of my urethane paints!
Verified Purchase
Hobbyair 1 With 40 Hose And Half Mask
Verified Purchase
Hobbyair 1 With 40 Hose And Half Mask
Q&A
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Per the supplier: The Hobbyair has a HEPA filter. The system is designed to deliver fresh / clean air from somewhere other than the area you are working in. This is why we make our systems with hose lengths from 40 to 160 feet long. If you locate the air pump in fresh air, then, yes, the system will deliver fresh air to your hood or mask all day. The HEPA filter will filter out dust etc. that are in the (fresh) air. I hope that helps.
400 watts would be required to run the system.
No, this is a one person unit with 2 hoses at 40', totalling 80'. The 2-person unit is the Buddy System like part number 12-15870.
Hobbyair 1 has 40' of hose, and the Hobbyair 2 has 80' of hose to the mask.
Yes, you could use it while working with fiberglass.
Per Vendor: "The turbine we use for our respirators has an appropriate (much lower) volume for breathing. Trying to breathe through a sprayer turbine would be very hot and way too much air."
It should work with a goatee, but it would depend on if its extremely long, braided, etc etc. We do have a hood that works with this system, it is part number 12-03319.
Clean with an anti-bacterial soap and allow to dry before storage.
Yes, this has a speed control so can increase the amount of air.
