Cole Hersee 11041 Piper type external power connector socket. Self-grounding, single pole. Diecast housing, spring-loaded door. Solid brass contact, 3/8” (9.5mm) diameter, with insulated tip to prevent short circuits. Rubber boot protects terminals and connections. Accepts up to 0AWG cable. Fits 2” (50.8mm) diameter hole. Flange holes 21/64” (8.6mm) diameter, 2 15/16” (74.6mm) on centers. Mates with 11042 plug. |
Quick
Piper Type Socket
exactly what Ive asked. many tks
Piper Type Socket
Piper Type Socket
Good quality product. Be sure to read the installation instruction. Very helpful.
Piper Type Socket
This has a receptacle into which we soldered a one gauge shielded wire and then mounted to the side of the aircraft. The dimensions said that it was a 2 inch hole, but a two inch hole saw created too large of a whole. Ended up using a 1 and 3/4 in hole saw to get the correct sizing. Tested it on a doubler before cutting on the actual airplane. Looks nice and installation was straightforward once we solve the problem of the hole saw.
Well made. Fast delivery.
I own one. It is a good cheap and useful thing to have on airplanes even small ones such as RVs. Surface finish could be improve for a 5 star rating
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
No, this part is non-certified.
We have added the installation instructions PDF to the "Documents" tab of this web page. Please review them there.
Yes that is correct.
No, the Cessna 172 has the 3 pin style port. See Part# 11-03158.