Description | Screw Size | Mounting Holes | Price | Buy |
---|---|---|---|---|
A6195-6Z-1D | 6 | Countersunk | $0.60 | |
A6195-8Z-1D | 8 | Countersunk | $0.57 | |
A6191-8Z-1D | 8 | Flush | $0.65 |
Riveted or welded in position. Attach access plates, doors or any part that must be fastened securely, yet easily removed with fasteners retained in a blind location. Install with AN426AD-3 rivets. |
on time great service
Anchor Nuts #8 Now A6195-8Z-1D
Good product
Anchor Nuts #8 Now A6195-8Z-1D
Tinnerman Nut # A6195-6Z-1
I was disappointed when I unboxed my sheet metal. Both ends of the rolled metal had been damaged. Most unfortunate because the top piece of the boot cowl I was forming required the full width of the metal. To turn my pattern lengthwise to avoid the damaged edges would have made it impossible to get both of other two pieces of cowling out of the sheet. Suggestion: some plywood in both ends of the box should do a better job of protecting the ends of rolled sheet metal.
Anchor Nuts #8 Now A6195-8Z-1D
good product as usual!
Anchor Nuts #8 Now A6195-8Z-1D
ditto.
Anchor Nuts #8 Now A6195-8Z-1D
good parts
Anchor Nuts #8 Now A6195-8Z-1D
great
Tinnerman Nut # A6195-6Z-1
Anchor Nuts #8 Now A6195-8Z-1D
Worked as expected.. Used them to install engine baffles on my OneX project with a AeroVee engine.
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
AN426AD-3 rivets. You would need to determine the correct length for your application.
3/32 rivet size (countersunk), 11/16 from center to center.