Thread | Part No. One Lug | Part No. Two Lug |
---|---|---|
10-32 | MS21061L3 | MS21059L3 |
All metal floating anchor nuts. MS21059 ( F5000 ) and MS21061 ( F2000 ). Anchor nuts are designed for blind mounted applications where it is impractical to use hex nuts or where it is desirable to have an attached nut for ease of maintenance. |
Delivered as ordered
Floating Anchor Nut MS21059L3
Floating Anchor Nut MS21059L3
Fast delivery
Floating Anchor Nut MS21059L3 (Pack Of 10)
Perfect
Floating Anchor Nut MS21059L3
As described. Prompt shipping
Floating Anchor Nut MS21059L3 (Pack Of 10)
Great service and professional people!
Floating Anchor Nut MS21059L3
Reliable and bullet-proof as long as the screw and remover obey the laws of physics.
Floating Anchor Nut MS21059L3 (Pack Of 10)
Nuts
Floating Anchor Nut MS21059L3
These work great! Rapid response and shipment, too.
Floating Anchor Nut MS21059L3 (Pack Of 10)
As ordered
Floating Anchor Nut MS21059L3 (Pack Of 10)
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
This is for a 1/4-28 threaded fastener, so the hole would have to be at least 1/4" for the fastener to engage the threads of the anchor nut.
The F5000 anchor nuts we offer require 3/32" diameter rivets for installation.
The rivet hole spacing is .688" for anchor nuts up to 10-32 threads, and 1" spacing for 1/4-28 to 3/8-24 threaded units.
The bolt hole accepts a 8-32 threaded bolt. The rivet holes accept a 3/32" diameter rivet.
1.051 inches long, 0.250 inches height, between 0.290 inches and 0.422 inches wide.
0.948 in long, 0.25 in high, .69 in mounting hole center to center.
10-32 thread, MS21061L3 is the single lug option.