Material | Thread Size | Description | Part Number |
---|---|---|---|
All Metal | 10-32 | Dimpled Rivet Holes | MS21047L3K |
Anchor nuts are designed for blind mounted applications where it is impractical to use hex nuts or where it is desirable to have an attached nut for ease of maintenance. K1000 All Metal Anchor Nut |
Exactly what I ordered, turned up well packed and in good order, thank you.
MS21047L3K Anchor Nuts 10-32
easy to install
Very useful. Two hints: get the drill jig. Run a steel screw it first before you use a stainless screw. The locking is initially too tight for stainless.
Your company is amazing. Parts show up usually in 24 hours. Prices are usually fair. As you can tell from my order history I am a regular.
As shown in catalog
Materials arrived on time and were exactly what was needed to complete the task. Very high quality products.
I have used these fasteners for many purposes over the years. They install by riveting, and since I usually used them close to edges of cowlings and panels, a rivet squeezer usually could be used, and made the job easy. The receptacles have a vibration-resistant feature (like metal lock nuts), and I have never had any machine screws inadvertently backing out or coming loose from them. The standard (full size) have enough space to install a Cleco and easily drill the hole to the other side.
Exactly what I needed. You guys are the best!
Im not sure what to say. Its a 6-32 blind nut that does what it is designed for
Exactly as advertised
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The tech data lists a few approved steel materials. Please review the Tech Data document in the "Tech Data" tab of this web page for all available information regarding these anchor nuts.
The diameter is 3/32", but grip can vary. CCC-32 is a commonly used pull type flush rivet to attach anchor nuts.
They will take a 3/32" diameter rivet.