Aircraft Spruce Canada
Brantford, ON Canada
Corona, CA | Peachtree City, GA
Chicago, IL | Wasilla, AK
Aircraft Spruce Canada- Wishlists
- 1-877-795-2278
- Contact Us
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
Garmin GMU 11 Magnetometer For G3X / G5 010-01788-00
MFR Model# 010-01788-00
Overview
Digital 3-axis Magnetometer Heading Sensor
Unlike conventional flux valve systems, which detect only the horizontal component of the Earth’s magnetic field, the GMU 11 magnetometer provides full 3-axis vector measurements for the most precise digital indication of magnetic field strength and direction. |
Features
- Small, lightweight, cost-effective source of magnetic heading reference
- Provides accurate 3-axis sensing of the Earth’s magnetic field for use by Air Data, Attitude Heading Reference System (ADAHRS) to determine aircraft heading
- Integrates with G3X™, G3X Touch™ and G5 series electronic flight displays
- Usable for both experimental and certificated aircraft installations with the G5 electronic instrument serving as DG/HSI and/or attitude indicator
- Installs easily; mountable in 4 cardinal compass directions
Compatible Devices
- G3X™
- G3X Touch™
- G5 Electronic Flight Instrument for Certificated Aircraft
- G5 Electronic Flight Instrument for Experimental/LSA Aircraft
Reviews
I saved a few dollars by ordering this from Aircraft Spruce instead of an avionics shop.
Verified Purchase
Garmin GMU 11 Magnetometer For G3X / G5 010-01788-00
Verified Purchase
Garmin GMU 11 Magnetometer For G3X / G5 010-01788-00
Verified Purchase
Garmin GMU 11 Magnetometer For G3X / G5 010-01788-00
Good price for the value-add. I hooked this up directly to a G5 (no G3X in my plane) and it worked perfectly. I *NEVER* have to set my DG anymore! Was very easy to install (and is not as sensitive to disturbances as the install manual might have you believe). I replaced my vacuum DG with this magnetometer and a G5, for about the same cost as getting a new vacuum DG!
It is so nice powering up your aircraft and not needing to dial in your heading against the wet compass. Product is worth more than its weight in gold.
Q&A
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
It is not included. Please see part # 11-15066.
The connector kit for the GMU 11 is part # 11-15066. To pair the G5 with the GMU 11, you'll need to run a 2 conductor shielded twisted pair on pins 1 and 2 of each connector. The shielding must be terminated to a ring terminal on the housing of the connector to function as a proper shield ground.
The GMU 11 connector kit (Garmin pn: 011-03002-00) includes the following: cast connector backshell with hardware can bus terminator 9 pin d-sub connector 9 size 20 d-sub socket contacts
The GMU 11 experimental version, part number 11-15077, is the item that you will need.
In the g3x manual under the gmu 11 section, there are detailed recommendations as to where and how you can install this unit.
Those units are part of the G3X system, so yes they will work together.
No you do not have to have the G5 connected to the GMU 11, however you must have the G5 connected to a certified GPS antenna. You can connect your GNS 430w to your G5(AI) via RS232.
No the G5 will not keep the GMU11 alive. You will need a backup power source.
Yes only one GMU 11 is required for the setup of two G5's.
Approx 0.16 lbs