Description | Part No. |
---|---|
Bowden Cable Clamp for 3/16" Bowden Cable | 05-15705 |
Designed to provide a simple method of anchoring a typical wire wound cable. Used in anchor hole of 7/16" diameter. |
Not what I wanted but worked good . Ones I wanted were back ordered for over 2 months .
3/16 Bowden Cable Clamp
As ordered
3/16 Bowden Cable Clamp
3/16 Bowden Cable Clamp
Works like a charm, but watch out when inserting this clamp through harder metals, the thread on the aluminum housing is very easily damageable - after that the nut will not thread on. It also should cost $2, not $17
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Per the supplier: 6061 aluminum with a steel lock nut.
No, this will not work as the Bowden Cable Clamps are made for 3/16" and 7/32" OD cable housing while the A-820 is a 1/4" OD cable housing.